Close filters
 
  •  
  •  
from to
1 From 2
No results were found for the filter!
Parrot Bebop 2 Pro Batterie / Akku - Schwarz
Parrot Bebop 2 Pro Batterie / Akku - Schwarz
Wiederaufladbarer Lithium-Polymer-Akku. Ladung des Akku erfolgt ausschließlich über die Parrot Bebop 2 oder das Akkuladegerät
Content 1 piece
€59.00 *
Parrot Disco Ladegerät
Parrot Disco charger
Optimum charging of the Parrot Disco battery charging time up to 1 hour per battery Incl. Connecting cable and 4 replaceable power plugs
Content 1 piece
€43.99 *
Parrot Disco Propeller Set
Parrot Disco Propeller Set
Foldable replacement propeller (consisting of 2 rotor blades) 20 cm long optimal drive enables effective and fluid flying with the Parrot Disco Incl. screw
Content 1 piece
€14.99 *
Parrot Bebop 2 Pro Batterie / Akku - Rot
Parrot Bebop 2 Pro battery / Akku - red battery
battery for the Parrot Bebop 2 and the Parrot Skycontroller (Black Edition) Rechargeable 2,700 mAh high-density Lithium-ion polymer (11.1 V) Charging time: approximately 55 minutes. This battery must only be used with the Parrot Bebop 2,...
Content 1 piece
€59.99 *
AR.Drone Panzertape / Duct Tape
AR.Drone DUCK TAPE
AR.Drone DUCT TAPE For repair of AR.Drone body and hull. 48mm x 10m - black For further spare- and tuning parts, prices and availabilities: please visit our DroneParts webshop...
Content 1 piece
€5.00 *
AR.Drone BALANCER Anschlusskabel / Adapter - ideal für Parrot Lipos!
AR.Drone BALANCER connector - perfect for...
AR.Drone BALANCER connector plug - perfect for original Parrot Lipos! Plug in between the original Lipo and the mainboard. Now you are able to power all modifications with XH-JST plug also by using your 2.0 original Lipo! Modifications...
Content 1 piece
€5.00 *
AR.Drone High speed ball bearings, bushings
AR.Drone High speed ball bearings, bushings
AR.Drone Parrot High Speed / High Performance bearing tuning (1 Set = 8 pieces)! Trust our experience with more than 10. 000 installed AR.Drone bearing sets worldwide! We offer here a se t of 8 sealed high speed ABEC-5 bearings. The...
Content 1 piece
€3.00 *
AR.Drone 2.0 FEUERWEHR Hülle - mit Licht-Bar montiert!
AR.Drone 2.0 German FIRE FIGHTER MOD with light...
AR.Drone 2.0 German FIRE F IGHTER MOD - ready assembled with light bar! Made in Germany! Outdoor hull, red/orange labeled ""Fire fighter"" letters Li ght bar with 2 blue flashing lights With balancer plug ( not usable with the original...
Content 1 piece
€14.00 * €29.00 *
AR.Drone 2.0 DroneParts 3M Klebefolie für Bodenplatten, Neu!
AR.Drone 2.0 DroneParts 3M adhesive foil for...
Adhesive foil for AR.Drone Base Plates - Made in Germany! Especially developed and produced for DroneParts in Germany! Foil assembly instuction: please start on the upper site of the plate (navboard holes). Do not fully remove the...
Content 1 piece
€5.00 *
AR.Drone 2.0 DroneParts Bodenplatte / base plate (durchsichtig)
AR.Drone 2.0 DroneParts Base Plate (transparent)
AR.Drone 2.0 DroneParts Base Plate (transparent) - Made in Germany! Especially developed and produced for DroneParts in Germany. We provide this polycarbonate base plate together with a transparent 3M adhesive foil (also especially...
Content 1 piece
€3.00 *
AR.Drone 2.0 FLACHBAND Kabel für Navigationsplatine, Navboard - (NEU!)
AR.Drone 2.0 RIBBON Cable for Navigation board,...
AR.Drone 2.0 Navigation board - ribbon cable / exclusively produced for DroneParts The development took some time, but NOW available! The Navboard ribbon cable... In case you damaged the original cable you avoid to replace/purchase a new...
Content 1 piece
€5.00 *
AR.Drone 2.0 CAMOUFLAGE Outdoor Hülle, Weiß - Made in Germany!
AR.Drone 2.0 CAMOUFLAGE Outdoor Hull, white -...
AR.Drone 2.0 CAMOUFLAGE Outdoor Hull, white - Made in Germany! Coated and finished with a special Camouflage foil. For further spare- and tuning parts, prices and availabilities: please visit our DroneParts webshop...
Content 1 piece
€10.00 *
AR.Drone 2.0 CAMOUFLAGE Outdoor Hülle - Made in Germany!
AR.Drone 2.0 CAMOUFLAGE Outdoor Hull - Made in...
AR.Drone 2.0 CAMOUFLAGE Outdoor Hull - Made in Germany! Coated and finished with a special Camouflage foil. For further spare- and tuning parts, prices and availabilities: please visit our DroneParts webshop...
Content 1 piece
€10.00 *
AR.Drone DroneParts "3-fach"/triple - ANSCHLUSSKABEL für Balancer
AR.Drone TRIPLE CONNECTOR for balancer
AR.Drone TRIPLE-CONNECTOR cable for the balancer plug Connect THREE Light-Systems in parallel to your balancer plug - e.g. the Angel-Eyes Ring, front light and LED strips! Not usable with the original AR.Drone 2.0 Lipos! Modifications...
Content 1 piece
€5.00 *
Mini Tamiya Female auf XT60 Male Adpater
Mini Tamiya Female to XT60 Male Adpater
AR.Drone Parrot adapter cable ""male"" XT60 to ""female"" Mini-Tamiya XT60 plug (male) to Mini-Tamiya Stecker (female), for all Zippy/Flightmax/Turnigy TUNING Lipos.
Content 1 piece
€2.00 *
AR.Drone 1.0 DroneParts CARBON-Bodenplatte / base plate
AR.Drone 1.0 DroneParts CARBON Base Plate
Carbon base plate for AR.Drone - made in Germany! The best available protection for your AR.Drone base. The Carbon base plate was developed within the German AR.Drone community, because of the high demand for an effective protection of...
Content 1 piece
€5.00 *
Mini Tamiya Male auf XT60 Female Adpater
Mini Tamiya Male to XT60 Female Adpater
AR.Drone Parrot adapter cable ""female"" XT60 to ""male"" Mini-Tamiya, NEW! XT60 plug (female) to Mini-Tamiya Stecker (male), fitting e.g. for the Turnigy-Balancer (offered in my eBay-Shop). So its possible to charge also the original...
Content 1 piece
€2.99 *
LIPO-TRESOR-Schutz vor Feuer/Fire protect
LIPO-TRESOR - FIRE PROTECT
LIPO-TRESOR! Made from robust fire-resistant fiber-glass and with a strong hook-and-loop fastener. Maximum of safety if you charge, transport or store your LIPO. Thats the save and right way to store Lipos!! In case of LIPO-FIRE this...
Content 1 piece
€5.00 *
1 From 2
Viewed